Without dwelling too much on the broad field of plant classification (here, if you want, you will find an article dedicated to this topic) and taking it for granted that the term “succulent plants” refers both to cacti and to many other succulent botanical families whose specimens have a different appearance from any other cactus, we are addressing a very “heartfelt” topic among novice growers. Even the grower who boasts a good knowledge of a given family, however, may find the following article useful, which recommends succulent plants (belonging to various botanical families) that are less demanding, more robust and simple to grow and therefore more suitable for those who are only now approaching the world of succulents. (…)

Premise

With a minimum of initial documentation and experience it is possible to grow all succulents without particular difficulties. Striking down to the essentials, the main cultivation elements to take into consideration are the substrates, watering, exposure and temperatures. In many cases these elements may be common to different types of succulents, for example the substrates, which for succulents must always be very draining, rich in inert materials and able to dry quickly. Other cultivation factors, however, can vary enormously from family to family but also from genus to genus. Some examples: cacti tolerate the cold well, while succulents originating from Madagascar or some African areas (e.g. Adenium, Uncarina, Pachypodium) cannot resist temperatures below 15-16 Celsius degrees. In the same Cactaceae family we find genera that are very resistant to cold (Echinopsis, Pediocactus, Opuntia) and genera that do not tolerate low temperatures (epiphytic cacti such as Epiphyllum, Schlumbergera, Rhipsalis or Melocactus and Discocactus).

This is why, for those who are only now approaching the cultivation of succulents, it is important to know which plants to start with in order to accumulate experience and best cultivate the newly purchased plants. The discussion, as mentioned, applies as much to cacti as to all other succulent families, since an enthusiast can be an expert in cacti and approach other families for the first time, such as Crassulaceae, Aizoaceae, Apocynaceae, Euphorbiaceae, etc.

Cactus

Let’s start with cacti. The first genera recommended to those who have no experience with these plants are undoubtedly Echinopsis, Gymnocalycium, Rebutia, Parodia (=Notocactus), Opuntia, Ferocactus. Be careful, there are many other cacti that are easy to grow but if you have to suggest some kind, you can’t go wrong with these. These are genera that group together very robust species, with few demands, capable of tolerating many cultivation errors and at the same time easily giving abundant and splendid blooms.

Attention: in some cases by clicking on the genus you will be directed to the downloadable PDF cultivation sheet of that same genus: a useful and detailed tool (4 pages) to deepen your knowledge of those plants.

Echinopsis are very common plants, extremely robust and able to tolerate the cold very well. They are therefore ideal for those who do not have a greenhouse or winter shelter (cold environment, necessary to encourage flowering). Echinopsis can spend the winter outdoors, often even in damp soil, although it is advisable to place them under a shed or porch. In spring and summer they produce showy flowers with a large corolla and long calyx.

Gymnocalycium are plants of South American origin (Argentina). They are easy to grow, tolerate the cold well (not frost: it is best that they do not go below 5 Celsius degrees and always in dry soil) and have growth rates that are not particularly slow. Furthermore, the genus brings together a large number of very different species and even just by cultivating Gymnocalycium it is possible to set up a very respectable collection. They flower in spring and summer already 4 or 5 years after sowing.

Other cacti recommended for those with little experience are the Rebutia. These are plants of South American origin, generally globose and with a tendency to cluster. Cultivation is very simple and their strong point are the flowers. In spring, these cacti produce an impressive quantity of medium-sized flowers of various colors depending on the species.

Parodia (once classified as Notocactus) are robust and very easy to grow cacti. They are satisfied with little care, have growth rates that are not excessively slow and produce beautiful blooms at the apex during the summer. Depending on the species, the flowers can be yellow, purple, red, orange. Even the thorns are variable from species to species and you can go from plants with slender and thin thorns to plants with very respectable thorns (P. maassii, P. buiningii).

Opuntias are bombproof cacti. They grow quickly, tolerate intense cold, multiply extremely easily by cutting and in many countries they can grow in the open ground, even exposed to bad weather during the winter. They can reach large dimensions (especially if grown in open ground) and produce beautiful flowers with colors ranging from pink to red, from yellow to orange.

Finally, for lovers of thorns, the first genus to recommend is Ferocactus. These are very robust cacti, always equipped with notable thorns, easy to grow, as long as they are guaranteed plenty of light, and grow relatively quickly. Some species flower relatively early (F. macrodiscus, F. schwarzii), others require at least a dozen years to produce the first flowers. Many species of Ferocactus can reach considerable dimensions even if grown in pots. However, those who have little experience with cacti should avoid starting with Ferocactus johnstonianus and Ferocactus lindsayi: two slightly more demanding and slow-growing species.

Crassulaceae

If you’re not particularly fond of thorns, the Crassulaceae family offers a wide variety of succulent genera and species. This family includes genera such as Aeonium, Adromischus, Crassula, Echeveria, Kalanchoe, Graptopetalum, Pachyphytum and the immortals Sedum and Sempervivum. Recommending a genus or a single species is almost superfluous: all Crassulaceae are easy to grow, very decorative, resistant and have good tolerance to cold. Having to indicate a couple of plants of this family, we can mention the very widespread Crassula ovata, called “jade tree”, with a small tree shape and oval, fleshy and bright green leaves. Another very interesting genus from an aesthetic point of view and easy to grow is that of Echeveria: plants of Mexican origin, very robust and with a characteristic rosette shape. Thanks to the high number of species and the many crossings carried out over the years, an infinite variety of Echeveria is available, with colored leaves that can range from blue to red.

Euphorbia

The Euphorbia family is very vast and includes very different genera. You can go from plants with a rounded stem without thorns, such as E. obesa, to plants with a columnar, curled shape, with leaves and thorns. Overall, the cultivation of Euphorbia is simple, but there is no shortage of species that require some experience. To begin with, E. resinifera, a very resistant and adaptable plant, E. enopla and E. obesa, beautiful and with an epidermis characterized by fascinating striations, can be indicated.

Agaves

It’s hard to go wrong with Agaves. These are very robust succulents, extremely adaptable and very easy to grow. In reality, they can almost be ignored completely: if placed in draining soil they are satisfied with rainwater, they resist intense sun and cold very well, to the point that in many regions they are grown in the open ground. They have rather rapid growth rates and many species can reach considerable sizes within a few years, particularly if kept in open ground.

Aloe

Even Aloes, in some ways similar to Agaves, are succulent plants suitable for those who are approaching the world of succulents and do not yet have much experience. Compared to Agaves, however, Aloes (succulent plants of African origin) tolerate intense cold less and should be kept at minimum temperatures no lower than 6-7 degrees. To begin with, you can start from the common but always elegant Aloe vera, a robust and relatively fast growing plant. Other very widespread and easy to grow species are Aloe arborescens and Aloe variegata, very easy to propagate and very generous with blooms.

Hoya

Finally, a succulent plant belonging to the Asclepiadaceae family. Hoya has seen its popularity grow among green enthusiasts in recent years. Aesthetically it has little in common with other succulents, but it is still a very decorative plant, also suitable for home cultivation and capable of producing beautiful cluster blooms. The star-shaped flowers are very particular, they have fleshy and smooth petals to the point that the Hoya themselves are also known as “porcelain flower” or “wax flower”. The plant produces long stems from which thick and fleshy leaves are formed, ranging in color from dark green to bright green, up to green streaked with yellow. Cultivation is simple and growth is relatively fast. Furthermore, Hoya also tolerate relatively low temperatures well, around 10 Celsius degrees.

 SUBSCRIBE TO THE SITE  – If you liked this article, subscribe to the site to have unlimited access to all the contents for one year or three months depending on the formula you choose. Here you will find terms and conditions.

 SUBSCRIBE TO THE NEWSLETTER  – If you want to receive the free newsletter every time new content is published, fill in the fields at this link!

Correlated articles

• Recognising succulents plants and cactus
• How to grow succulents
• Most frequent questions and doubts
• All cultivation cards in pdf
• Distribution of cacti and succulents: maps

© The texts, videos, photos and graphic elaborations of the site “Il fiore tra le spine” are original material and are covered by copyright. It’s forbidden to reproduce them in any way.

L'articolo Succulent plants, a small guide for those approaching this world: the simplest species to grow proviene da Il fiore tra le spine.

Let’s see in this article how to correctly choose the plants for our compositions (…)

Avoiding difficult cohabitation

First of all, compositions with different plant families should be avoided: succulents together with tropical plants such as orchids, or succulents together with carnivorous plants, just to mention a couple of examples, are combinations to be discarded without any doubt. The needs of plants belonging to different families can be completely irreconcilable, and by making an arrangement we are forcing some plants into a coexistence (in a pot, bowl or any container) that in nature would never occur and that in the long run is bound to fail. So why should we throw away time, labor, materials and plants just to enjoy for a few days or a few weeks a combination that only works from the point of view of our aesthetic standards?

Being coherent with the philosophy of this site, let’s then talk about arrangements made only with succulent plants (vulgarly known as “fat plants”). Again, however, it’s important to consider that the world of succulents is very broad and includes dozens of families, hundreds of genera and thousands of species, each with its own specific needs. In some cases the needs are compatible, in others less so, and in others not at all. A first important distinction to do is between cactaceae and noncactaceous succulents. As is usually said, while it’s true that all cacti are succulent plants, it’s true at the same time that not all succulent plants are cacti. And the difference between a cactus and any other succulent (e.g., a Lithops, a Crassula, an Euphorbia, etc.) can be quite remarkable not so much in shape and appearance as in growing requirements. So much so that the coexistence of these plants in a single pot may prove impossible or at any rate short-lived.

For those who want to approach the subject and begin to understand the difference between a cactacea and any other succulent plant, I recommend reading this introductory article of mine on classification. Don’t be frightened by the topic: actually learning to distinguish the various succulent plant families is less difficult than it may seem!

Choosing plants

The first criterion in identifying plants for composition is based, of course, on the personal taste. Anyway, it may be useful to keep in mind a few simple pointers. For example, it may be interesting, for the purposes of the final result, to choose plants with different bearing, so as to achieve a “wavy” composition, with tree-like succulents and others with low or prostrate habit. But even this, all things considered, is related to the aesthetic taste, and compositions made with several specimens of a single succulent genus can also prove pleasing. One example? The classic bowls filled with Lithops, the so-called “stone plants”: they are beautiful because of their similar shape but infinite color shades. On the other hand, the “objective” factors to regard when placing several plants in one container are the following: soil, frequency of watering, minimum tolerated temperatures, and exposure. Assuming that we are talking here about succulent plants, the combinations can be many, as long as we choose plants that have similar needs in terms of soil, watering, temperature and exposure. It is enough to know a minimum of the characteristics of the various succulent families to select which plants we can combine and which are better not to keep in one container. An example: I do not recommend putting cacti with leafy succulents (e.g., Crassula, Echeveria, Hoya, etc.) in the same composition. The reason is very simple: cacti can live for months without water, while most leafy succulents if they stay dry for a few weeks start to perish. The water requirements of these families are very different, and while coexistence is still possible, my opinion is that it’s not the case to complicate life and, above all, make the plants suffer or otherwise grow in unsuitable conditions.

Related to the frequency of watering is the issue regarding the potting soil: a cactacea, as well as a Lithops or several species of Euphorbia with a compact bearing, grows best in poor substrates, with a lot of aggregates and little organic material, while leafy succulents need significantly higher percentages of organic matter (at least 50 percent). It’s clear that in a container shared by all plants, we are not able to use different potting soils according to individual needs, but we have to to stick to the criterion of “one size fits all,” that is, the product that will satisfy all needs.

Temperatures are also important, unless we decide to keep the composition indoors all year round (but I’ll never recommend it for succulent plants). There are succulents, such as cacti, that in dry potting soil can tolerate temperatures well below freezing without problems; others that cannot go below 12-14 degrees (e.g., Adenium, several species of Euphorbia, and all succulents native to Madagascar).

Similar discussion for exposure: some succulents want a lot of light, if not direct sun, while others do not tolerate excessive levels of sunlight and grow well in half shade (many Euphorbia and the Haworthia, to name a couple of cases). Clearly, if we put several plants in one container, it’s appropriate to choose specimens with similar light requirements, so that we do not have problems or imbalances in growth, with healthy plants and others sunburned or etiolated and suffering from too much or too little sun.

Choosing the container

This is a purely aesthetic question related to personal taste, as much for colour as for shape (square pot or rectangular box, round pot, tall pot, low pot, bowl, etc.). Just a couple of considerations: the container chosen for compositions must be adequate for the number of plants we intend to place and must be deep enough. In other words, the container must be able to comfortably accommodate the root bread of the plants that you place there. This may seem like an obvious clarification, but taking into account that very often for compositions we use those beautiful enameled pots for bonsai, I think it’s necessary to remember that the less space we give the roots to be able to develop, the more we limit the growth of the plants (and maybe this is exactly what we want: to make a composition in which the plants are always “under control,” that is, of limited size…). When choosing a container, the only imperative is: make sure it has drainage hole(s)! Water stagnation is detrimental to all types of plants, except aquatic plants…. Regarding the material, anything can be ok, and each element, terracotta, plastic, aluminum, wood, can be valid or not.

For a more in-depth look at the topic, I recommend reading this specific article.

How to proceed

Once the plants and container have been chosen, the first thing to do is to try arranging the succulents in the new pot or bowl without removing them from the plastic pots to get an idea of how to make the composition. For this purpose, it may be useful to spread a layer of one or two centimeters of expanded clay on the bottom of the new pot: this way we can easily move the plants around and try several combinations to get arrangement we like best. Of course, we can also decide to include other elements in the composition, such as rocks or pebbles of various sizes. Again, the “trial run” with the plants still in their individual pots is most useful to get clear ideas before proceeding definitively.

Once we have found the arrangement we prefer, it can be useful to take a photo with the cell phone (which is always handy), so that any doubts can be cleared up immediately when we go to repot the plants by removing them from their individual pots to arrange them in the new container. If the plants are in the correct substrate, i.e., peat and aggregates, it’s enough to take them out of the pot, check that there are no pests in the root ball, and place them in the new container, at the bottom of which we have placed some potting soil. If, on the other hand, the plants we need to repot are in pure peat (as is often the case when buying them from non-specialized nurseries), it’s a good idea to remove some of the potting soil and untangle the roots as much as possible. With cacti this procedure should be done very firmly, removing all the peat with the help of a brush and, in case the soil loaf is very dry, with a stream of water (before repotting, however, it’s necessary to leave the plant with the roots in the air for at least a week).

Once the plants have been placed in the new container, all we have to do is fill it with potting soil, starting from the edges and going all the way to the center, avoiding leaving gaps here and there. This is both to give stability to the plants and to avoid stagnation or “puddles” when we water. When we have filled the pot with the substrate and stabilized the plants, it will be useful to tap the container lightly and several times on the shelf so that the potting soil is evenly distributed. Remember to stand at least an inch and a half below the rim of the pot with the substrate so that there is no spillage of potting soil when we water.

Finally, to complete the composition, if you like the effect, it may be useful to spread a layer of grit on the surface. You can use river gravel or aquarium quartzite (you can find it in every color): this is also a matter of personal taste. Beyond the aesthetic aspect, however, spreading a relatively heavy layer of inert material on the surface is a great way to even out the color of the substrate and to keep the pot tidy, especially when watering. The layer of inert material (it is best to avoid porous materials such as pumice and lightweight materials such as perlite) should be one centimeter thick at most. If we use gravel or quartzite, the water from watering flows quickly between the pebbles and doesn’t form stagnation around the collar. At the same time, the grit layer ensures that in the warmer months the water doesn’t evaporate too quickly, particularly if we have used a very draining potting soil. Another material to avoid for the surface layer of the arrangements is fine sand: it retains moisture around the collar of the plants for a long time, and with “vigorous” watering it leaks everywhere.

Landscaping

Quite different from the concept of “composition” is that of “landscaping“. In this second case, compositions are made with plants, but the ultimate goal is to reproduce as closely as possible the aesthetic appearance of the natural habitat. Take a look at this video and you’ll understand immediately what I mean! Thus, for these compositions there are very precise rules that govern the choice of plants, potting soil, elements that embellish the composition (rocks, branches, shrubs). In short, here the aesthetic criterion is oriented by reality, so much so that in order to create these small “habitat cutaways” one is inspired by Nature, observing in detail photographs of the environment one intends to reproduce and using materials that are compatible if not identical to those found where succulent plants grow wild (marl, chalk, field soil, sand, etc.).

If you want to know everything about the materials with which to make substrates, here you will find a specific article.

 SUBSCRIBE TO THE SITE  – If you liked this article, subscribe to the site to have access to all the contents for one year or three months depending on the formula you choose. Here you will find terms and conditions.

 SUBSCRIBE TO THE NEWSLETTER  – If you want to receive the free newsletter every time new content is published (even if you have not subscribed to the site), fill in the fields at this link!

My video

Correlated articles

Six identical cacti in three different soils
How to repot cacti and succulent plants
Substrates for cacti and succulents
Fertilization: how and when

© The texts, videos, photos and graphic elaborations of the site “Il fiore tra le spine” are original material and are covered by copyright. It’s forbidden to reproduce them in any way.

L'articolo Compositions with succulents: how to choose plants and what is important to know proviene da Il fiore tra le spine.

Giving a succulent plant a scientific name, in other words correctly identifying a succulent plant, is far from simple. The classification, in general, the so-called taxonomy, is the prerogative of researchers, scholars, true enthusiasts and, in some cases, real maniacs of order. In that boundless land that is the classification of plants – and in the specific case of succulents – there is often great confusion, to the point that it is not uncommon to see the continuous re-denomination of the same plant, first included in one genus, then placed in another, then moved to another one. Some plants are classified in one way by some researchers and differently by others; some tend to simplify and reduce the number of genera, while others are inclined to divide plants as much as possible, according to their peculiarities, into several genera, species, subspecies, forms and varieties. Diatribes between authors and researchers about the classification of this or that plant are the order of the day. Thus, the common grower and the ‘collector’ of succulents are forced to rely on plant tags or try to classify them by comparing the specimen with pictures found on the Internet or in books.

In the following article, we see how to find your way and what you need to know to begin to identify and classify succulent plants. We also learn how to distinguish a cactus from any other succulent plant and how to identify the best-known succulent families. (…)

Per proseguire nella lettura dell'articolo Accedi o Abbonati
To continue reading the article LogIn or Subscribe

L'articolo Recognising succulent plants and cactus: a guide to identification and correct classification proviene da Il fiore tra le spine.

You can deepen the knowledge of Euphorbiaceae in the following article, with description, images, curiosities and cultivation techniques specific to this plant family. (…)

Historical notes

The first succulent Euphorbia was discovered between 25 B.C. and 18 A.D. by King Juba of Mauritania (present-day Morocco). The name given to the family has curious origins: after having found out one of these plants (perhaps E. resinifera or E. officinarum) on the Atlas Mountains, it seems that King Juba gave it the name of his doctor, Dr Euphorbus, drawing inspiration from the translation of the term, which means “well-fed”. Some non-juice species of Euphorbia were instead known for years, since the time of Ancient Greece and were called “Tithymalus“. The two names co-existed until the time of Linnaeus, who combined them under the name Euphorbia in 1753. Nowadays the name Tithymalus survives but only indicates a subgroup of Euphorbia.

Problems with the classification of plants and the distinction into families? Here you’ll find a perfect article for you.

Features

The appearance of Euphorbia, as I said, can be extremely variable. The common denominator of this family, however, is the sexual organ of the plant. In this case, we do not speak of “flower” but of “cyathia”. These are very specialized floral structures and at the same time very different from flowers as we understand them. The cyathiazians are, in fact, small in size and can be unisexual or bisexual. Basically, inside unisexual cyathia, there is a single female flower or some male flowers, while in bisexual cyathia there is a female flower surrounded by male flowers. This is one of the main differences between succulent Euphorbiaceae and Cactaceae.

Cultivation

Since they come from all over the world, the various Euphorbia species have very different cultivation needs. Even staying in the “field” of succulent Euphorbias, you can have plants that need a lot of light as well as plants that adapt well to reduced exposure. Some Euphorbias can withstand prolonged drought well and others that do not withstand long periods of dryness. Some Euphorbias can withstand low temperatures (even below zero) and Euphorbias that do not tolerate low temperatures below 7-8 degrees.

For my choice (and not to deviate too much from the regime of cultivation of my cacti) I cultivate only Euphorbia able to tolerate the cold. I have specimens of E. obesa, E. enopla, E. ferox, E. meloformis, E. canariensis, E. resinifera. I have also tried to grow E. candelabrum but with poor results because of its poor tolerance to low temperatures. As for the species I grow, I don’t have particular problems: they are quite resistant plants and can be cultivated more or less like cacti. I keep them in soils a bit richer in organic matter than cacti, both based on the classic lapillus, pumice and peat, and on clay and inerts such as pumice, sand and river gravel. I water them only during the growing season, from April to September, leaving them completely dry in the remaining months of the year, and I keep them in greenhouses not shaded, therefore with good exposure.

Soils for cactus and succulent plants: all my “recipes”.

Euphorbia obesa

And now just two words about Euphorbia obesa, much appreciated and widespread among succulent lovers. It can be said that this plant is the succulent par excellence: in its juvenile stage, it’s perfectly round, “fat”, in fact, without thorns and with a harmonious look, embellished by the streaks on the surface of the stem. Growing up, it tends to assume a short cylindrical bearing while maintaining the thick stem inside which it stores its water reserves.

Reproduction

Euphorbias can be easily reproduced both by seeding and cutting in the spring months. In this second case, it is good to be careful when cutting because many species contain latex that can be toxic in some cases. To stop the release of latex, once cut a branch of Euphorbia (wearing gloves!), you can immerse it in water for a few minutes, then let it dry for at least a couple of weeks and bury it in pumice or sand until it has taken root. The cuttings can then be repotted into suitable soil.

How to propagate cacti and succulents from seed: the whole procedure.

Curiosity

Some Euphorbia species are very usual and are easily found on the market, especially at certain times of the year. What is commonly called “poinsettia“, in fact, is nothing more than a Euphorbiaceae (E. pulcherrima). In the winter period, following some cultivation expedients (in particular after having kept it almost in the dark for a few months) this plant produces deep red apical leaves, becoming very showy and decorative. Another very usual species is E. milii, commonly called “Thorn of Christ”. It’s a Euphorbia with thin stems covered with thorns, at the apex of which sprout colourful and very decorative small inflorescences. There are no particular historical findings, but this plant owes its common name to the legend according to which the crown of thorns placed for mockery on the head of Christ was made by weaving shrubs of this Euphorbia.

 SUBSCRIBE TO THE SITE  – If you liked this article, subscribe to the site to have access to all the contents for one year or three months depending on the formula you choose. Here you will find terms and conditions.

 SUBSCRIBE TO THE NEWSLETTER  – If you want to receive the free newsletter every time new content is published (even if you have not subscribed to the site), fill in the fields at this link!

© The texts, videos, photos and graphic elaborations of the site “Il fiore tra le spine” are original material and are covered by copyright. It’s forbidden to reproduce them in any way.

L'articolo How to cultivate Euphorbia: tips to best care for these succulents loved by all the cactophiles proviene da Il fiore tra le spine.

Have you always wondered what part of the world your cactus or succulent plant comes from? From the Americas or maybe from Asia? From Africa or Europe? The topic of succulent plant distribution is vast and very intricate. However, to begin to simplify, we can say that all cacti are native to the Americas, while succulent plants in general (i.e. non-cactaceous succulents) come from different parts of the world.

In this article and in the two large maps attached, we see how cacti and non-cacti succulents are distributed around the world. We see in particular from which geographical areas the succulents originally evolved. (…)

Per proseguire nella lettura dell'articolo Accedi o Abbonati
To continue reading the article LogIn or Subscribe

L'articolo The distribution of cacti and succulents in the world: maps with the states where they grow proviene da Il fiore tra le spine.