In this article we see how to make a proper substrate for use with any genre of cactus and, with appropriate adjustments, with succulents, in general. We will make it, and this is the point of this article, with materials that anyone can now easily find in any place (…).

Introduction

One characteristic that any substrate for cacti and succulent plants, in general, must have is the ability to drain water and dry quickly. It is the starting point, the end to which we must strive if we want to make good potting soil for succulent botanical families. The materials we can use are virtually limitless and can also vary according to the type of cultivation we want to pursue. Spartan cultivation to obtain plants similar to those in the wild, “push” cultivation to have plants that are swollen and “immaculate-looking,” “maintenance” cultivation, that is, with no particular purpose other than to grow the plant properly, etc. The combinations we can make with various materials are virtually endless and, theoretically, we could try to prepare a suitable substrate for each individual species that we intend to grow. Each plant has its own specific needs, and even among cacti, there are the species that want more organic material, others that want exclusively mineral potting soils, others that require lime substrates, and so on.

Of course, this fact opens the door to experimentation, which I recommend to anyone who has the time, desire and curiosity to test various substrates to figure out which is the best formula for this or that kind of plant (obviously in combination with the other growth factors, such as water, exposure, temperatures…).

Here you will find an article related to one of the experiments I have done over the years.

The “common” materials

After this long introduction, going back to the purpose of this article, which is nothing more than to provide basic directions for making proper soil for cacti and succulent plants using only materials readily available in any nursery and building materials retailer. Yes, because while it is true that online we can buy (up to certain quantities, of course), peat, quartzite, gravel, sand, gypsum, pumice, and lapilli of all colours and sizes, as well as potting soils specially made for cacti or succulent plants, it is equally true that good compromises can be made with “common” materials, especially if you don’t want to have too many problems.

Field soil and marl deserve a separate discussion. Field soil means clay, which can be more or less calcareous, more or less sandy, and more or less rich in nutrients. In short, there are endless types, and the best way to know whether or not that field soil, mixed with aggregates such as gravel, pumice, and sand, is suitable for cacti is to experiment with it for at least a couple of years. We can say the same thing for marl, a material exceptional for growing different kinds of cacti (if you are unfamiliar with marl, find a specific article here). Marl is almost impossible to find commercially, and even when you get it, you should be careful because there are various types, and not all of them are good for cacti.

Learn more about using field soil and marl in cactus substrates in this specific article.

The classic mix

A first viable option for those who want to avoid problems, as I have written on several occasions, is the traditional mix of equal parts lapilli, pumice and peat. It is the most popular potting soil for growing cacti and succulents, especially in skilled nurseries. In principle, it gives good results with all cacti, even working very well for leafy succulents (e.g., Crassula, Echeveria, etc.) simply by adding a little peat or earthworm humus, to make the substrate a little richer organically. Pumice and lapilli usually come in sizes between 3 and 7 millimetres, and this type of substrate is easily found online or at skilled nurseries. Unfortunately, it is not yet found commercially in all nurseries or gardens that do not specialise in succulents.

This is the article’s main focus because this substrate can be made without difficulty by retrieving materials from any large nursery or garden store.

First of all, the peat. It is the organic component of the substrate that contains the nutrients needed by plants. Most cacti, in nature, live in organically poor soils, which is why in the correct substrates intended for these plants peat should never be prevalent. Again, peat retains moisture for a long time, while the basis of a valid substrate for succulents, as we have seen, is the ability to drain water and dry quickly. For these reasons potting soils intended for cacti, it’s a good idea not to use peat percentages of more than 40 per cent. With some species, particularly those with “taproots” (e.g., Ariocarpus), the amount of peat will have to be decidedly small: a maximum of 20 per cent of the total. On the contrary, in leafy succulents is correct to provide at least 50 per cent peat because these plants need more organically “rich” potting soils. At the same time require greater amounts of water than cacti (their substrate will therefore have to remain moist a little longer to allow the roots to absorb the necessary water).

Peat can be found in any nursery: in fact, it is the material that makes up all so-called ‘universal potting soils’, i.e. intended for any genre of plants. At the same time, peat is the basis of all other packaged potting soils that we find in gardens: from those for citrus trees to those for ornamental plants, turf, acidophilic plants, and aromatic plants. All these potting soils are composed mainly of peat (there can be different types, but it is always peat) and, as appropriate, small percentages of sand, perlite, or pumice. The only potting soil not to be considered with succulents is orchid-specific potting soil, which contains no peat (or very little of it) and is composed mainly of bark.

The same ready-made potting soils for cacti and succulents are nothing more than peat with a little sand, pumice or perlite. On their own, they are no good, but they can be considered on par with peat or universal potting soil, with the advantage that they will already contain some sand, perlite or pumice.
For the rest, one ready-made potting soil is as good as another: what matters is that it is of good quality and that the peat is fine and not rich in filaments, bark, timbers, and other things. If we want to be precise and have a choice, we use blond sphagnum peat, which is slightly acidic and is fine for most succulents.

As an alternative to peat, since from a sustainability point of view, its consumption on a global level has become excessive in recent years, one can use earthworm humus, which can be found in all nurseries.

The other two elements of the traditional mix are pumice and lapilli. You can find both in well-stocked gardens, with one “flaw”: the size is almost always coarse, around 10 millimetres. There are no problems if you have to re-pot large succulents. But if you have seedlings to be placed in 5 or 7-centimetre pots, there are two alternatives and you have to be patient: you can either sift the material keeping the smaller part, or you can use the hammer (with a greater dose of patience) and break pumice and lapilli into smaller pieces. Of the two materials, in my experience, pumice is best, simply because it dries faster. With these three elements (universal potting soil, pumice, lapilli), we can already make a perfect substrate that is very popular in growing cacti and succulents. Mix well one part peat (as a unit of measurement, you can use the scoop) with one part pumice and one part lapilli, and the substrate is ready. If it is intended for leafy succulents, add a couple of scoops of peat to the final mix; if you intend to use it for “mangy,” very moisture-sensitive cacti, reduce the amount of peat by half.

The ‘simple’ mix

A valid alternative to the classic pumice/lapillus/peat mix, which can also be found for sale online or in large bags at some nurseries specialising in succulents, is the potting soil that I have prepared in the video published below. It is an even simpler but perfect substrate for almost all cacti and succulents, which I use when I finished my specific mixtures. Again, the starting point is peat. If the universal potting soil is of good quality, there will be no need to sieve it because it will not have any residual bark, coconut fibre, wood and other ‘impurities’. Good quality universal potting soil, it bears repeating, is usually peat of two or three types already sieved fine (and even this is fine because we will be adding the ‘coarse’ part to the compost), and added with a little pumice or, more often, perlite.

To one part peat, we add one part pumice and half a part fine sand, and the substrate is ready. As I have written before, the pumice we find in gardens is usually coarse-grained but can be sieved or crushed if necessary. Sand, on the other hand, is easily found at building material dealers. Caution: it must be river sand, preferably silica sand. Avoid sea sand. As I pointed out, in this substrate to one part peat and one part pumice I add only half a part sand because fine sand is only very useful in small quantities. If we were to make potting soil with only fine material (sand, pure peat or pumice powder, for example), we would create a potential succulent ‘killer’. In fact, after a few waterings, the substrate would compact and remain constantly moist, causing asphyxiation and root rot. Therefore, it is essential to have both a fine part (useful for rooting) and a coarse part in the substrate, which can make the soil ‘loose’ and increase its drainage capacity.

As I explain in the video, we can make small changes to this mixture if necessary so that it is also perfect in specific cases. For example, if we have to re-pot leafy succulents or hardy plants such as Echinopsis or epiphytic cacti such as Epiphyllum or Schlumbergera we can increase the amount of peat a little (add a couple of shovelfuls at the end and mix everything well). On the contrary, if we are dealing with delicate, slow-growing and particularly sensitive to stagnation plants such as Ariocarpus, Pelecyphora, Aztekium, Copiapoa and others, we can halve the amount of peat and add gravel or quartzite to the substrate.

The latter are also readily available materials in any city. Gravel (with a grain size of between 3 and 5 millimetres) can be found at building material dealers, often mixed with sand. In these cases, with a bit of patience and a fine-mesh sieve, you will be able to separate the sand from the gravel and thus be able to use them in separate dosages. On the other hand, quartzite can be found in aquarium shops or pet shops. There are countless types of quartzite: it can be bought in various sizes and colours. Just be sure it is not “treated” or in any way coloured material.

 SUBSCRIBE TO THE SITE  – If you liked this article, subscribe to the site to have access to all the contents for one year or three months depending on the formula you choose. Here you will find terms and conditions.

 SUBSCRIBE TO THE NEWSLETTER  – If you want to receive the free newsletter every time new content is published (even if you have not subscribed to the site), fill in the fields at this link!

My video

Correlated articles

How much light do cactus need? A summary table
How to repot cacti and succulent plants
Substrates for cacti and succulents
The correct soil: the materials you can use
When and how fertilize cactus and succulent plants

© The texts, videos, photos and graphic elaborations of the site “Il fiore tra le spine” are original material and are covered by copyright. It’s forbidden to reproduce them in any way.

L'articolo A good cactus potting soil with materials readily available in any nursery? Here is how to do it proviene da Il fiore tra le spine.

We look at the benefits of repotting cacti and succulents over the winter in the article that follows. (…)

Repot in winter: the advantages

By repotting in winter, the plants are completely still (except for those that grow even in the cold like Pediocactus and some Escobaria, for example) and the soil is completely dry and it is easy to clean the roots well, where needed. If the soil in which the plant is found is already correct and if I have decided to use the same type of soil for that plant, I simply shake the earth a little to free some roots and check that the root system is in good condition and does not contain parasites. It is essential that the new substrate is dry or, at most, slightly damp. Another important aspect deriving from the choice of the winter months for repotting is in fact this: until the end of March the plants will not receive water and the roots will have plenty of time to heal. Some injury to the secondary roots is almost inevitable during repotting and, in the event of a change of substrate with thorough cleaning of the root system (for example if the plant was in peat) it can easily happen to break or injure even the primary roots. Similarly, in the event of a total change of soil or a suffering plant, it may be necessary to drastically shorten the roots by cutting them. For all these reasons, winter repotting is preferable. This is a guideline, not a rule, though. In fact, cacti and succulents in general can be easily repotted even when they are in full vegetation, as well as when they are in bloom. In these cases, however, it is important to repot in dry soil and wait at least two or three weeks before watering, keeping the plant in a bright place but not in direct sunlight.

Wait or repot immediately?

Many wonder if it is necessary, once a plant has been flared (in winter or in summer, the substance does not change), to leave it bare root for some time or if it can be repotted immediately. Let’s say that leaving the plant with the roots in the air, in a place sheltered from direct light, is certainly a good precaution. In this way we will be sure that any injuries or cuts to the roots will heal perfectly. From what I’ve learned, though, this step isn’t always necessary. If the plant is healthy and if the fleshy roots have not been injured or cut, you can repot immediately: time to remove the old substrate, check that there are no parasites among the roots, and repot in the new substrate. For years I have only allowed plants to dry for a few days in the case the root system has been affected by rot (in this case I also treat it with a powder fungicide) or those plants with major lesions to the primary roots or taproot.

Some examples

In recent weeks, as for years now, I have been dedicating myself to repotting my plants, in particular to repotting some of my sowings from 2017. These are mainly Gymnocalycium (spegazzinii and ferox), Lobivia ferox, Thelocactus lloydii. To these are added some of my sowings of Ferocactus latispinus already of a fair size, since these are plants born in 2010. All the plants are in perfect condition: the roots are healthy and well developed and the plants are robust and well formed. For my convenience and to help the growth of still young plants a little, for repotting I used a standard soil based on pumice, lapillus and peat in equal parts, to which I added 5% of fine sand.

In these photos, here are some steps of the repotting procedures during winter. To learn more about the topic, you can consult the section “Repotting“. If you want to know more about soils and materials for making the various substrates, you can instead consult the “Substrates” section.

 SUBSCRIBE TO THE SITE  – If you liked this article, subscribe to the site to have access to all the contents for one year or three months depending on the formula you choose. Here you will find terms and conditions.

 SUBSCRIBE TO THE NEWSLETTER  – If you want to receive the free newsletter every time new content is published, fill in the fields at this link!

© The texts, videos, photos and graphic elaborations of the site “Il fiore tra le spine” are original material and are covered by copyright. It’s forbidden to reproduce them in any way.

Correlated articles

All articles on sowing cactus and succulents
When to pricking out cactus seedlings
Seasonal care for cactus and succulents
Cactus cultivation cards

L'articolo Repotting cacti in winter: here’s why and what are the advantages of this choice proviene da Il fiore tra le spine.

I generally start repotting from mid-December onwards, to finish within the first few months of the new year. This year, considering the number of plants I sow that need repotting, I started well in advance. Despite the still high temperatures for the period, in fact, the plants are already in stasis and it is possible to proceed without problems. The repotting period is one of the most debated topics, together with the composition of the growing soils: there are those who repot only plants in vegetation, those only in spring, those during the winter and those who repot at any time of the year. Let’s say that there isn’t a fixed rule: over the years, I have repotted practically in all seasons, according to needs, and I have never encountered any problems. The important thing is to stick to that only really useful precaution which is to avoid watering immediately after repotting. It is necessary to give the damaged or cut roots time to heal in dry soil during repotting, so as to avoid the risk that they may trigger rot. The rest is a matter of choices. Personally I prefer to repot and change the soil to the plants during the winter season, or in any case when the cacti and succulents are in vegetative stasis, for example just before spring, so that several weeks elapse between repotting and the first watering. I’ve been following this “rule” for years and have never had a problem. Of course, it may happen that some plants find it difficult to restart after repotting, to the point of being stuck even for a whole year, but this can happen by repotting at any time. Let’s not forget that repotting is in any case a significant “stress” for plants. This is also why I prefer winter, when the cacti are at rest and the effects of repotting are less “traumatic”.

Let’s explore the topic of repotting and substrates for cacti, in particular the “standard” soil based on pumice, lapillus and peat in equal parts, in the following article. (…)

Per proseguire nella lettura dell'articolo Accedi o Abbonati
To continue reading the article LogIn or Subscribe

L'articolo Repotting cactus: the classic mix of pumice, lapillus and peat to speed up growth proviene da Il fiore tra le spine.

Based on the experiences of some growers, plants of the genus Ferocactus seem to appreciate the addition of calcareous material in the substrate. Above all, the thorns would benefit from it, which would be significantly strengthened compared to those of specimens grown in more “traditional” soils, for example the classic pumice, lapillus, peat mix in equal parts. Based on this consideration, I wanted to make an experiment with some of my sowings of Ferocactus acanthodes (seeds obtained from a dried fruit taken from an adult plant during a trip to Arizona) and Ferocactus latispinus. The acanthodes were born in 2013, while the latispinus are from 2010. Except for the seedling soil, which was based on peat, pumice and gravel, these plants grew up in the traditional compost with 30% fine peat and the rest pumice and lapillus in equal parts. I generally use this mix when I want to help seedlings develop more quickly, and then pass them into what I consider my “standard potting soil” made of sandy clay, pumice, gravel and 10% peat.

In the following article we see exactly what my experiment consists of, what type of soil I decided to use and above all we see the results with the photos taken two years after the test. (…)

Per proseguire nella lettura dell'articolo Accedi o Abbonati
To continue reading the article LogIn or Subscribe

L'articolo Strengthening the thorns of cacti: a small experiment with some Ferocactus sowings proviene da Il fiore tra le spine.

Let’s see how to proceed and all there is to know about repotting,
especially the most challenging ones due to the plant’s size and the thorns on the stem. (…)

There is repotting and repotting…

Obviously, repotting is easy for Cactaceae or succulent plants with little or no thorns, such as most Astrophytum, but also Matucana madisoniorum, many Gymnocalycium, some Turbinicarpus, Frailea, as well as plants with papery thorns (Tephrocactus articulatus v. papyracanthus) or silky-thorns, such as some Mammillaria and Rebutia, or succulents such as Echeveria, Crassula, Lithops, etc… In the same way, everything is easier if you are dealing with young specimens and therefore of small dimensions. In these cases, even the most prickly plants can be repotted without problems since the plant itself weighs very little, and it is not necessary to exert pressure or special efforts to remove it from the pot and place it in a new container.

Challenging repotting

For more demanding subjects, such as a E. grusonii from 20 centimetres in diameter upwards, it is necessary to be patient and take some precautions. Many people use gardening gloves: I avoid them because they deprive the hands of the slightest sensitivity, and it is easy to break thorns or damage the plant if you don’t have the right… touch. When starting a repot of this kind, i.e. large plants covered in thorns, the first thing to do is to have the necessary supplies on hand, i.e. the new pot and the potting soil. At that point, it will be enough to wrap the plant in an old towel or fix some polystyrene blocks to the thorns to protect them and avoid breaking them or getting pricked. When the plant is “packed”, it can be lifted and tilted to the side so that the old pot can be removed.

If the plant has been in the old container for many years and the soil is compact, the operation could be more complex. In the case of a plastic pot, you will have to vigorously beat the walls of the container with the palm of your hands (in many cases, you need your fist!) to try to make the soil loaf come off and slide the plant out. If you have used a terracotta pot and the plant has not been repotted for years, you may need to arm yourself with a hammer to break the old container. With terracotta pots (porous material, unlike plastic, which is perfectly smooth), the roots stick to the inner walls because they can absorb water, and in many cases, during the repotting, there’s no alternative to breaking the old container.

In this regard, it must be said that even the choice of the correct pot is fundamental, and on every type of container, there are pros and cons. Terracotta or plastic? Round pots or square pots? Small vases or wide bowls? Many individual vases or more plants in one container? All of these questions are answered, as well as fully explored, in this article.

On repotting, in general, you can find everything at this other link.

Once the plant has been freed from the old pot, it is advisable to check the state of the roots, verify that there are no parasites such as cochineal and remove as much as possible the old soil. If the plant is already in suitable potting soil, it will be enough to shake it and free the roots a bit; if the old substrate is rich in peat or too much used, it’s better to get busy (maybe even with the help of a brush) to remove it and free the root system.

If some roots are too long, and if they’re not primary roots (thick and fleshy), you can shorten them with scissors or gardening nippers: just a clean-cut, the plant has no problems, stimulated to produce new capillaries.

New pot, new soil

Before repotting, many people recommend leaving the plant’s roots in the air for a few days to allow them to heal the wounds suffered during cleaning. Frankly, I see the reason only if some primary ones are broken, or the root system has been thoroughly cleaned, for example, because the roots were dry or rotten. In other cases, I repot immediately after cleaning, with the only care to use dry soil and not to water for at least ten days after repotting.

Whichever choice you made (wait a few days or repot immediately), all you need to do is to put a little potting soil in the new pot, place the plant on it, being sure the collar is at the right height related to the edge of the container and fill it all around the stem with the new substrate. Some growers recommend putting expanded clay, pumice, or coarse-grained lapilli in the bottom of the pot to promote drainage. I do this only when I use very profound vases compared to the size of the root system or when the roots are few, dry or too short: in all other cases, I see no reason to deprive the plant of soil if it’s already draining and rightly formulated.

Here I have written about the various types of substrate I use.

With small plants, easy to handle, it is better still to hold the plant with one hand, place it at the right height related to the edge of the pot, leaving the roots in mid-air, and fill the pot with potting soil with the help of a shovel. At the end of this operation, it is a good idea to lightly tap the edges of the new container with your hands, then lift and drop the pot several times on the table to let the potting soil settle and not leave empty areas inside the container.

A little trick

More than strongly thorny plants – Ferocactus, for example, can be easily handled by lifting them by the old thorns, as they are so strong – in my opinion, the real problem is plants with fragile or hooked thorns. In the first case, you need a lot of attention and a good dose of experience (and patience) to avoid breaking the thorns; in the second case, you need a lot of attention because the hooked thorns (as in the genus Ancistrocactus) will inevitably get stuck to the skin with the risk of making it difficult to clean or move the plant while filling the new pot with soil. A trick with this type of plant is to flush and clean the plant, place two sticks (or two brushes that are not too large) on either side of the new pot, place the plant between the two sticks, holding it by the spines and letting the roots fall free into it. When the plant rests on the two supports, we will have our hands free to fill the pot with soil, and when we arrive at the right level, we just have to take out the sticks, hold the plant by the thorns and finish the job by putting the substrate around the collar.

Beware of glochids!

The really tricky plants are those of the Opuntia genus. Most of them have very short and thin thorns, called glochids, that can enter the skin and firmly hook thanks to the hooked tip. Glochids don’t hurt, but they are very annoying, irritating and almost impossible to remove immediately. For repotting these plants is the only time I use gloves unless the Opuntia “blades” are large and the glochids are widely spaced, in which case you can handle the plant without getting glochids on your fingers.

 SUBSCRIBE TO THE SITE  – If you liked this article, subscribe to the site to have access to all the contents for one year or three months depending on the formula you choose. Here you will find terms and conditions.

 SUBSCRIBE TO THE NEWSLETTER  – If you want to receive the free newsletter every time new content is published (even if you have not subscribed to the site), fill in the fields at this link!

Correlated articles

Six identical cacti in three different soils
How to repot cacti and succulent plants
Substrates for cacti and succulents
The correct soil: the materials you can use

© The texts, videos, photos and graphic elaborations of the site “Il fiore tra le spine” are original material and are covered by copyright. It’s forbidden to reproduce them in any way.

L'articolo Repotting cacti: a few tips on how best to do it without… donating blood! proviene da Il fiore tra le spine.

Some growers repot every year, while some others repot when required – i.e. when a plant shows signs of suffering or when the pot has become too small related to the stem. There can be many reasons for repotting (or racking, as someone says alternatively) a cactus or a succulent plant, and every grower has his own rules. As for me, I don’t have “fixed deadlines”: I evaluate plant by plant trying to understand if new soil and more space are needed. I repot my succulents when I see that the vase is now too small, when I believe that the soil has exploited or when I want to grow specific specimens more quickly. While it is true that many plants live quietly in the same container for five or six years (in many cases even longer!), it’s also true that frequent repottings (once a year or every two years) help to speed up the growth of cacti, particularly young plants and genera that over time take on considerable sizes, such as Echinocactus and Ferocactus. I repot, also, when I notice that a plant has blocked for a long time and it doesn’t grow or produce new thorns. It can be the spy that something, at the root level, is going wrong. A plant that doesn’t grow or doesn’t swell despite watering, or, again, a plant that loses its colour (showing, for example, a lack of magnesium that not even fertilization can solve) can be saved by a repotting, with the cleaning of roots and the supply of new soil.

So let’s see in this article in which period it is better to repot cactus and succulent plants, which pots to choose (square, round, terracotta or plastic), how to check the roots and how to proceed in practice. (…)

Per proseguire nella lettura dell'articolo Accedi o Abbonati
To continue reading the article LogIn or Subscribe

L'articolo How to repot cactus and succulent plants: in which period, how to proceed, which tricks to use proviene da Il fiore tra le spine.